Reduce The Wear Of The Grate Of The Crusher

Because the hammer of the crusher is one of the indispensable working parts for the machine, if the hammer is subjected to severe wear and tear, the relative grate will also undergo different degrees of wear, then what measures should be taken to reduce the wear of the grate How to improve the efficiency of the machine?

First of all, it should be understood that after these two parts of the crusher encounter wear and tear, the gap between the grate and the grate and the hammer will become larger and larger. This state will cause a strong The efficiency of impact but crushing is reduced accordingly, and the particles of the material will not be fully broken, causing blockage in the crushing chamber and affecting the service life of the machine. Therefore, timely check whether the adjustment grate has serious wear or looseness. At this time, the grate should be adjusted and strengthened to ensure the normal operation of the crusher. If the crusher is used in the initial stage, the radius between the materials should be compared and the spacing between the grate bars should be adjusted accordingly according to this data.

For grate strips with serious wear and tear, new products should be replaced in time to ensure that production efficiency will not be reduced due to wear.