Hollow Brick Machine Supplier

Description

The conveyor belt of the Manual Interlocking Block Making Machine sends the pallet to the bottom plate of the lower part of the mold, and the bottom plate rises to the bottom of the mold. The skip conveys the mixed material into the mold by reciprocating motion, the upper pressing head is pressed, the mold vibrates, and the mold is moved. The material in the material is compacted while vibrating. Then, the upper pressing head is pressed down slightly, the bottom plate is lowered with the upper pressing head, and the bottom plate drives the supporting plate and the forming block to the bottom, and the demoulding is completed. Finally, the forming block is taken away by the conveyor belt to complete the block forming process.

Parameter

How many areas should the line take up?

A:It varies from 3000~4000 square meters to 7000~10000 square meters. The bigger place you have, you will more place to put the raw material and cured blocks, It is decided by your demand.

How many bins of batcher can choose?

We have three kinds, 2 bins, 3hins & 4 bins, usually we suggest equirped 3 bins , it can save time to loading raw material, what’s more, It is easy to change recipe if find some good for replace stone.

What’s the sizes of batcher?

2*4m³, 3*4m³&4*4m³, each hopper can enlarge to 6m³.

What’s kinds of sand as raw material?

River sand of 0-3mm will be the best for machine to making the blocks.

How to choose mixer?

We have two series of mixer , twin-shift mixer and planetary mixer. normally, use twin-shift mixer like JS500 for 0.5m³per time, JS750 for 0.75m³per time and JS1000 for 1m³per time.