Cement Brick Making Machine

Space of Ground

5200

Gross Weight

14.2T

Vibration Force

80Kn

Vibration Mode

Board Vibration

Vibration Motor Power

7.5Kw

Vibration Frequency

3600cycles/minute

Moulding Cycle

16-25 Seconds/cycle

Pallet Size

960×960×30mm

Motor Power

44.2Kw

Power

80Kw

Water Consumption

8-15T

Number of Workers

7-10

Main Materials

Cement, crushed stone dust, gravel, sand, coal fly ash, iron/aluminium dust, crushed cinder and some industrial wastes

Products of Machine

Hollow blocks, Solid bricks, Pavers, Kerbstone, Slope blocks, slabs, interlock bricks and so on.

High

Production

Solid Brick

240x115x53mm

42Pics/Mould

(8hours)

67000-75000Pics

Hollow Block

240x115x90mm

21Pics/Mould

(8hours)

27500-37800Pics

Hollow Block

390x190x190mm

Paving Block

200x100x60mm

Good Reasons to choose XD8-15

Good Design:

1. The balance system adopts four-pole guarding way with extended bush to ensure the exact movement of mould. Gear and shaft balance system can make male and female mould move stably.

2. The way of feeding is revolving, convective and compulsive to ensure block density and reduce feeding cycle. Gear driving mode of feeding is more steady. Feeder moving is two curved arms drived by two cylinders, which makes feeder move quickly, durablly, and steadly.

3. Stacker is controled by frequency conversion to adjust speed. The movement of stacker is flexible and steady.

Hydraulic System:

The hydraulic system adopts proportion direction valve. The valve can adjust flow rate and buffer cylinder. Therefore, it can protect cylinder and extend life, and make operation steadily and quickly.

Vibration System:

The vibration adopts frequency conversion technique. The assembly is oil immersed vibration. This improve high speed loading and makes concrete liquefied and air-outed. The five advantages is vibration assembly synchronization ,soft starter, densify block, electric saving and quick moulding.

High Automatic level:

Using Japanese Omron sensor as signal source and Germany Panasonic PLC as central processing unit to make oil system, air system, electric system and machanical system to be one part. The plant can work automatically and cyclically. Our technicians put fault diagnosis, problem alarming into computer by safety logic control. The screen will show fault and methods to client if there is some problems.

Steady&Safe System:

It adopts separation of high and low voltage electricity, low voltage controls high voltage technique. This will solve problem of high voltage interfere and ensure gaining of exact signal. It is safe for people and machine.