Fly Ash Brick Making Machine

Description

Machine for Molding Blocks is intelligently controlled by PLC and has a friendly man-machine interface. The control system is equipped with complete logic control, production procedures, fault diagnosis system and remote control functions. Therefore, it does not require a professional, but only requires simple training by the operator. Machine for Molding Blocks can be used for a variety of purposes, such as paving bricks, riverside bricks, revetments, bricks, and grass bricks.

Parameter

Advantages

Machine for Molding Blocks have low feed rates and high vibration frequencies. The platform vibration works with the mold to completely fluidize and discharge the concrete in two to three seconds to achieve high density.

It uses advanced hydraulic control proportional technology to freely handle oil pressure and system quantities. Therefore, different materials can produce high quality products.

All programs are operated by PLC and equipment, with factory equipment to achieve man-machine dialogue. The control system also includes advanced safety logic systems and fault diagnostic systems.

What’s the worker required and the feature of simple production line, semi-automatic production line and fully automatic production line ?

Simple production line: generally using bagged cement, no cement weighing system and central control system, and the degree of automation is a bit low. Natural curing, about 10 workers are required. The machine cost is only a little.

Semi-automatic production line: using bulk cement, cement metering system and centralized control system, the degree of automation is relatively high. Natural conservation and about 8 workers are required. The producing line cost is from $20,000 to $80,000, it depend on the capacity requirement.

Fully automatic production line: automatic batching - weighing - stirring - brick making, automatic transfer - curing - palletizing, pallet recycling, production automation, natural conservation or steam curing. However, the input cost is relatively high and about 3 workers are required. The producing line will cost about $350,000 to $400,000.

How many days for the natural curing of the block?

Usually , the fresh block need one night for inside curing, after that, transfer block out do water curring, it need 5-7days .